BC crews shoot everything from studio series to a one-day coffee commercial. The way in looks different depending on which end you start at, so this guide covers both: the union routes, with the requirements each union publishes, and the non-union work that’s open to anyone.
How crew work is split up
Big features and series in BC hire through the unions. Commercials, music videos, corporate video, documentaries and low-budget indies hire union and non-union crew. Creative BC points newcomers at that second group too: smaller production companies, commercials and low-budget local shows.
If the job titles are new to you, film crew roles, explained goes through what each one does.
Five unions represent most BC crew. IATSE 891 and ACFC West list many of the same departments, so when a union production calls, ask which one it works with.
| Union | Who it covers |
|---|---|
| IATSE 891 | Technicians across most departments on its productions. You apply to a specific department. |
| ICG 669 | The camera department: the International Cinematographers Guild. |
| DGC BC | Directors, production and unit managers, assistant directors, the locations department and production assistants. |
| Teamsters 155 | Drivers, security, catering, animal handlers and wranglers, automotive and marine crew, dispatched to film and TV productions. |
| ACFC West | Technicians in more than 20 departments, from art, grip and electric to sound, editing, costume and transportation. |
The unions and permits
You don’t need a union card to start. Every union below has a way in for non-members, usually called a permit: you work on a union production when no member is available, and the days you work count toward membership. Here is what each one publishes. Rules change, so each union’s own page is the final word.
IATSE 891
Apply to become a permittee in your department, with the tickets and experience that department asks for. Permittees pay working dues but not annual dues, and don’t get the full member benefits. Once you’ve worked 90 days under an IATSE 891 agreement in one department, you can apply for membership. Applications start on the applications page, which said it was taking them in all departments when we checked.
For membership, 891 requires three Actsafe courses: the Motion Picture Industry Orientation and Exam, Motion Picture Safety Awareness and WHMIS. Members who take approved Actsafe courses get the course fee back in full, according to Actsafe.
ICG 669 (camera)
The direct application asks for proof of 100 days worked, with pay stubs preferred. The proof has to show the days, your role, the production and the pay; travel days don’t count, and invoices, call sheets and letters on their own aren’t accepted. BC applicants also need six courses:
- Actsafe Motion Picture Safety Awareness
- WHMIS
- Motion Picture Industry Orientation (offered only through Actsafe)
- Motion Picture Safety for Supervisors
- Fall protection training
- Aerial and scissor lift training
ICG 669 also runs a Camera Trainee Program in Vancouver, Calgary and Winnipeg. It costs $2,000 plus GST, with a $50 application fee that isn’t refunded, and it doesn’t guarantee full-time work. When we checked, it wasn’t taking applications and the next intake hadn’t been set.
DGC BC (ADs, locations, PAs)
The way in is the Permittee Logbook Holder Program (the version we read was revised December 2024). To apply you need to be 17 or older and legally able to work in Canada as a PA, and to have worked 30 days in the past five years as a PA Helper under the DGC BC agreement. Students and recent graduates (within five years) of a recognized BC film program can defer those 30 days; the office confirms which programs qualify.
You also need five courses and certificates: the Motion Picture Industry Orientation, WHMIS, Actsafe’s Anti-Bullying and Harassment course, Motion Picture Safety Awareness, and a BC Traffic Control Certificate from the BCCSA or UHS. Once you’re in, $5 a day comes off your pay as a permit fee, you need 100 paid days a year under the DGC agreement to stay in, and your logbook goes to the office every three months. Logbook holders can’t take work as a location scout, trainee assistant director (TAD) or trainee assistant location manager (TAL): accepting one ends your place in the program, with a one-year wait to rejoin.
Full associate membership comes later: 150 paid days on at least three DGC BC productions within five years, and Canadian citizenship or permanent residency. Of the 150, only 45 office PA days and 40 prep PA days count, so read the program document before you plan around it.
Teamsters 155
Local 155 fills film jobs through a dispatch system: members and permittees book themselves in and out of availability. Its Join 155 page takes applications only when it’s open, and when we checked it wasn’t accepting any. The same page lists the courses: Motion Picture Safety Awareness for every division, plus WHMIS, Basic First Aid (formerly OFA Level 1) and Transportation of Dangerous Goods, which has to be taken through Local 155 and costs non-members a fee.
ACFC West
ACFC West (Local 2020 Unifor) takes applications for permittee status, full membership and position upgrades through the forms on its site. For membership, Actsafe lists the Motion Picture Industry Orientation and Exam, and WHMIS.
On a temporary visa? Union rules differ, and the DGC’s full membership needs citizenship or permanent residency. Creative BC suggests asking the unions directly, and points to commercials, reality TV and smaller productions as easier places to start.
Safety courses
Two Actsafe courses come up for almost every union, and one of them is free. Take that one first.
- Motion Picture Safety Awareness: free, about five hours, online and self-paced. You don’t have to finish it in one sitting. Actsafe lists it as a requirement to become a permittee with DGC BC, ICG 669, IATSE 891 and Teamsters 155.
- Motion Picture Industry Orientation and Exam: $155 plus GST. An online module first, then a four-hour group session on Zoom with your webcam on. The exam is online and open book: 45 minutes, 80% to pass, three tries.
- WHMIS, on hazardous materials, which every union above asks for.
Some departments add more: first aid and dangerous goods training for Teamsters applicants, a traffic control certificate for DGC permittees, and fall protection and lift training for camera. A non-union production may not ask for any of it, but “MPSA, MPIO, WHMIS” on your profile reads as someone who plans to stay.
Schools and training
No union above requires film school. School does give you set time and contacts, and a recognized BC film program lets you defer the DGC’s 30 PA Helper days. Some places to look:
- Vancouver Film School, whose programs include Film Production and Sound Design, plus short intro courses in directing and cinematography.
- Capilano University’s Bosa Centre for Film and Animation in North Vancouver, with motion picture arts programs. Check the current calendar for which ones are taking applications.
- SFU’s School for the Contemporary Arts, with a film BFA that mixes production and film studies.
- InFocus Film School in downtown Vancouver, with film production and cinematography programs and traffic control training.
- CineVic in Victoria, an artist-run society with workshops, gear rental and a members’ community for independent filmmakers.
Creative BC runs Creative Pathways, the province’s motion picture workforce program, including Setwork and Meet 10, which connect diverse talent with hirers and paid set work. The same page lists its free training and mentorship programs.
Where the calls are
Creative BC says plainly that it doesn’t run a job board or hire crew. Calls come from four places:
- People you’ve worked with. Creative BC’s own first piece of advice is to use your personal network. Keys call people they’ve worked with first, which is why a confirmed reference on your profile carries weight.
- The Crew Call BC job board. Every call shows its rate, a person reads a poster’s first calls before they go up, and you apply with your profile. Turn on the weekly email and new calls come to you on Monday mornings.
- Creative BC’s In Production list. A weekly list of productions shooting or about to shoot in BC. It doesn’t list crew contacts, but it tells you which companies are busy, and the smaller ones are worth an email asking about trainee or PA days.
- Your regional film commission, if you live outside Greater Vancouver. Creative BC lists the eight regional commissions that help productions find local crew.
Facebook groups carry calls too, but they come and go, and anyone can post in them. We don’t list them here. Ask people on your first few sets which ones their department uses, and treat any post asking you to pay a fee or move to WhatsApp before you’ve met anyone as a scam.
Your reel and stills
Heads of department hire from what they can see in a minute. For camera and lighting, that means a reel. For grip, sound, art, locations and the production office, people hire on who vouches for you, and a few clear stills from set show your work as well as any video.
- Best shot first. Whoever’s watching may stop after the opening, so don’t build up to it.
- Keep it short. A minute or two is plenty. Cut anything you’d have to explain away.
- Say what you did on each piece. A line like “Gaffer, Rainy Day Coffee spot, 2026” saves the viewer guessing whether you lit it or carried the sandbags.
- Ask before you post unreleased work. Commercials and series often can’t be shown until they air. A still of your setup with the talent out of frame is usually fine to ask for.
- Host it on YouTube or Vimeo. Paste the link into your Crew Call BC profile and it plays right on the page, next to up to 12 stills.
No reel yet? Shoot stills of your setups on student films and low-budget days: the lighting plot, the dolly track you laid, the cart you built. That’s the work a key grip or gaffer wants to see.
Day one on set
Everyone was new once, and crews remember who showed up ready. Most of it comes down to a short list.
Before you go
- Read the call sheet the night before. It has your call time, the location and crew parking, the weather, the nearest hospital and the scenes being shot.
- Call time is when you start work, not when you pull in. Arrive early enough to park, grab breakfast and be at your truck or department on the minute.
- Get the deal in writing on non-union work. The day rate, how long a day is (10 and 12 hours are both common), overtime, any kit fee and when you’ll be paid. A deal memo or a plain email both count.
On the day
- Find your key (the head of your department) or whoever hired you, and ask what they want you on.
- On the walkie, listen before you talk. Call the person by name and wait for “go for…” before you say the rest. “Copy” means you heard. “Flying in” means it’s on the way. Take long conversations to another channel.
- When the AD calls “rolling”, stop moving and stop talking until “cut”. Stay out of the actors’ eyelines.
- Don’t touch another department’s gear. Grips handle stands and rigging; electrics handle lights and power. Ask first, every time.
- Phone on silent, and no photos of the set, the cast or the script on social media unless the production says so. Many make you sign a non-disclosure agreement.
- Leave the director’s and actors’ chairs alone.
At wrap
Wrap means the shooting is over, not your day. Your department still coils cable and loads the truck. Stay until your key releases you, fill in your times on the timesheet or send your invoice, and thank the person who called you in. People call back the crew they liked working with.
Kit: what to own, what to rent
Start with the things you’ll use every day on any crew: work gloves, a headlamp or small flashlight, a multitool, a sharpie and boots you can stand in for 12 hours. Your key will tell you what else your department expects.
Rent the expensive gear by the day until you know what you’d use enough to own. Then list what you own on your profile. A production hiring a gaffer with a 3-ton package, or a sound mixer with their own kit, reads that list.